24

Overview

Basic Info.

Model NO.	EPDO-02
Certification	CE, RoHS, Reach
Brand	Ever Electronica
Transport Package	Inner Pack and Poly and Master Carton and Pallet
Origin	Jiangsu, China

Product Description

Product Description

2 phase step motor bipolar chopper drive technical data :
• DC power supply : 15 ÷ 48 Vdc• Phase current : 0,4 ÷ 2,4 Apeak• Chopper frequency: ultrasonic 40KHz;• Emulated Step angle: Full Step, ½, ¼, 1/8, 1/16, 1/32, 1/64, 1/128, 1/5, 1/10, 1/20, 1/25, 1/30, 1/36, 1/50, 1/100configurable by means of Dip-Switches and other step angle could be defined by software.• Protections against : over current, over/under voltage, overheating, short circuit between motor phase-to-phase and phase-to-ground;• Service SCI interface for programming and real time debugging• Dimensions : 93 x 52 x 21,5 mm (without connectors);• Protection degree : IP20 ;• Pollution degree : 2 ;• Working temperature 5°C ÷ 40°C ; Storage temperature -25°C ÷ 55°C ;• Humidity : 5% ÷ 85% not condensing;

Product Parameters

Model	Max Current	Power Supply	Control Mode	Input/Output	Matched Step Motor
EPDO-02	2.4A	15-48V	PULSE MODE	3 IN/0 OUT	NEMA8 TO NEMA17 OPEN LOOP
EPDO-04	4.5A	24-48V	PULSE MODE	3 IN/1 OUT	NEMA23 TO NEMA24 OPEN LOOP
EPDO-08	7.8A	24-75V	PULSE MODE	3 IN/1 OUT	NEMA34 OPEN LOOP
EPAO-04	4.2A	100-240VAC	PULSE MODE	4 IN/1 OUT	NEMA34 OPEN LOOP
EPDC-10	10A	24-75VDC	PULSE MODE/programmable	3 IN/2 OUT	NEMA11 TO NEMA 34 CLOOSE LOOP

Working Status (LED )
Driver disabled : green blinking (1s)Driver enabled : green onMotor open phase: red onMotor phase shortcut : red blinking (100 ms)Over voltage: green on (1 sec) - red on (1 sec)Under Voltage: green on (1 sec) - red on (1 sec) - red on (1 sec)Over temperature : green on (1 sec) - red on (1 sec) - red on (1 sec) - red on (1 sec)
Verify the installation
- Check all connections : Power supply, Stepper motor and control logics.- Make sure that all settings are correct for the application.- Make sure that the characteristics of the DC power supply are appropriate for the drive.- If possible, remove the load from the rotor of the motor to avoid wrong movements and eventual damages.- Supply power and make sure that the green led is on or blinking. If the led is OFF, shut down immediately and check ifall connections are correct.- Enable the current in the motor (without STEP Clock) and, if possible, verify the presence of the Holding Torque.- Execute a movement of some steps and verify if the rotation direction is the desired one.Company Profile

Taking advantage of the proactive climate of the 70s, in 1977 the engineer Felice Caldi, who had always been a passionate builder and inventor, founded an innovative company, operating internationally in the field of software for industrial machinery.
Since then, this small company based in Lodi has enjoyed continuous successes related to innovative products and cutting edge "best in class" technologies in the field of industrial automation, as proven by the many patents filed during the years as well as the important awards given to it by the Chamber of Commerce of Milan and of the Lombardy Region.
The company, thanks to its successes over time, has grown considerably, expanding its sales network abroad and opening another company in China to manage the sales flow in the Asian market.
Ever attentive to the dynamics and needs of the automation market, constantly evolving and continually seeking technological innovation, Ever Elettronica has been able to respond to all the technological challenges that have arisen over the years, providing solutions able to make its customer's machines more and more performing and highly competitive.
And it is precisely to underline the importance and the uniqueness of every single customer that we design, with care and dedication, highly customised automation solutions, that are able to perfectly meet any request, both regarding software and hardware.
Our team of mechatronic engineers can indeed customise the software with specially designed firmware, and it can also adapt the motor by customising, for example, the length of the cables or the diameter of the crankshaft and the IP protection degree, all strictly based on the customer's technical specifications.